Standard
Specifications

Take a look and you will see our standard materials are top quality.

Note: Products may change at any time, with or without notice, depending on availability from the manufacturer and/or vendor or Icon Legacy Custom Modular Homes’ decision to switch to a different product.

Cabinetry

  • Oak Recessed Flat Panel Kitchen Cabinets
  • 2-1/2″ Crown Moulding and Under Cabinet Trim
  • Dove Tail Drawers, 3/4″ Shelves with 1 Pull-Out Tray
  • 75 lb. Full Extension Drawer Glides with Soft-Action Close Mechanism on Base Cabinet Drawers
  • Elevated Corner Wall Cabinet, Crown and Under Cabinet Trim
  • High Pressure, Square Edge Laminate Top and Backsplash (Kitchen)
  • Oak Recessed Flat Panel Bath Cabinets
  • One-Piece Cultured Marble Vanity Top (Baths)
  • Medicine Cabinet with Mirror and Decorative Lighting (Per Vanity Bowl)

Electrical

  • 200 AMP Main Service Panel with 40 Breaker Spaces
  • Smoke Detectors and Carbon Monoxide Detectors (Per Code)
  • Fan/Light Combination in All Baths
  • 30″ Kitchen Range Hood; Vented to Exterior
  • Bedrooms Have One Switched Receptacle
  • Brushed Nickel Ceiling Lights in Hall, Laundry, Kitchen, Dining Room, Foyer, and Walk In Closets
  • Recessed Can Light Over Kitchen Sink with Separate Switch
  • Two Pendant Lights Above Islands and Peninsulas (Per Plan)
  • Wireless Door Chimes (1 in Front and 1 in Rear)
  • (2) RG-6 TV and (2) Cat-5 Phone Jacks
  • Wired for Electric Range (Per Plan)

Exterior

  • CertainTeed “Main Street” Vinyl Siding (Dbl 4 Clapboard, Dbl 5 Clapboard, or Dutch Lap)
  • Smooth Fiberglass Front Door with Sunburst, Composite Jambs, and Vinyl Brickmould (Per Plan)
  • Smooth Fiberglass Rear Door with Half Glass, Composite Jambs, and Vinyl Brickmould (Per Plan)
  • 6′-0″ Vinyl Sliding Glass Door (Per Plan)
  • Satin Nickel Schlage Lever Locks – Exterior Door Hardware and Dead Bolt – Keyed Alike
  • Vinyl Double Hung Low “E” Brickmould Windows with Screens and Argon Gas
  • One Exterior Light Supplied For Each Door
  • Vinyl Shutters, Installed on Front
  • Exterior Doors Installed with Pan & Bracing Beneath Jamb

Floors

  • 2×10 Floor Joists @ 16″ O.C. w/ Double Perimeter Band – Front & Rear (12″ O.C. on 31′-6″ Wide Models Available)
  • 5/8″ T&G OSB Floor Decking Glued and Nailed
  • Vinyl Floor Covering (Per Plan)
  • 25 oz. FHA Approved Carpet with 8 lb. Rebound Pad (Per Plan)

Interior

  • Warm Beige Primer Paint on Walls w/ 3-5/8″ Crown Moulding, Throughout Living and Bedroom Areas
  • Smooth Ceilings with White Primer Paint
  • 2-Panel Cathedral-Top Interior Doors with Smooth Finish
  • Satin Nickel Lever Style Hardware
  • Privacy Hardware on Bathrooms and Master Bedroom
  • 3-1/2″ Colonial Base Moulding and 2-1/4″ Colonial Casing (Semi-Gloss White)
  • Window Sills (Semi-Gloss White)
  • 16″ Deep Linen and Pantry Shelving (4 Rows)
  • Shirt and Skirt Shelving for Walk in Closets

Plumbing and Heating

  • Tuff-Pex Fresh Water Lines Stubbed (Code Dictates)
  • PVC Drain, Waste, and Vents (Stubbed)
  • Shut-Off Valves on All Fixtures
  • Delta Leland Chrome Dual Handle Faucets in Baths
  • 60″ One Piece Fiberglass Tub/Shower with Anti-Scald Valves
  • Elongated Water Closets, Water Saver
  • 8″ Deep, Double Bowl S/S Sink and Gooseneck Faucet with Pull-Down Spray in Kitchen
  • Ice Maker Hook-Up (Recessed Box for On-Site Appliance)
  • 2-in-1 Shower Hand Spray in Master Bath
  • 7/12 Pitch, Non-Storage Rafter Roof System @ 16″ O.C.
  • 10″ Gable End Overhangs
  • 10″ Eave Overhangs, Fixed with Soffit and Fascia Installed when Possible
  • 7/16″ OSB Roof Sheathing
  • Ice Shield Installed on Eave Overhangs
  • Minimum 15# Felt Paper Shingle Underlayment
  • Vented Vinyl Soffit, Ribbed Aluminum Fascia, and Aluminum Drip Edge
  • CertainTeed Architectural Shingles
  • Shingle Over Ridge Vent (Shipped Loose)

Walls

  • 2×6 Exterior Walls @ 16″ O.C. with Sheathing
  • 8″ Mating Walls @ 16″ O.C. with Sheathing
  • 2×4 Interior Walls @ 16″ O.C.
  • 1/2″ Drywall Throughout, Glued and Screwed
  • 8′-0″ Wall Height

Insulation

  • R-21 Fiberglass Exterior Wall Insulation with Vapor Barrier
  • R-38 Fiberglass Ceiling Insulation with Vapor Barrier
  • Exterior House Wrap

Warranty

  • All Icon Legacy Custom Modular Homes Come with an RWC 10-Year Structural Warranty

Raised Ranch

  • Recessed Entry (Per Standard Floor Plan)
  • 4-Way Switch for Foyer Area
  • Landing with Floor Vinyl and Stairs Up to Living Area with Carpet to Match Living Room (All Shipped Loose)

Cape

  • 8″ Mating Walls @ 16″ O.C. with Sheathing (First Floor)
  • Rafter Roof with 12/12 Pitch @ 16″ O.C. and 5/8″ OSB Floor Decking
  • (2) Gable End Windows with Style and Type to Match First Floor
  • 30″ Prehung Interior Door with 24′ of Interior Walls
  • Plumbing and Electrical Stubbed up for Future onsite Bath and Living Area

Two Story

  • 8″ Mating Walls @ 16″ O.C. with Sheathing (First Floor)
  • Insulation Installed Around Perimeter Between Floor and Ceiling
  • Plumbing Supply Lines Run Second Floor to Drop Area
  • All Siding for Second Story Shipped Loose

Pin It on Pinterest